shift tube
Moderator: FORDification
- michael69
- Blue Oval Guru
- Posts: 1083
- Joined: Sat Dec 01, 2007 8:53 pm
- Location: South Carolina,Walhalla
shift tube
Can someone give me a part# and where to get a shift tube that fits automatic column with manual steering. All I can find are for 3 speeds and autos with p/s. I need one for manual steering automatic column.
Michael69
'69 Ranger 'F-100 2WD SWB 351W C6 AUTO
1985 CJ 7 jeep w/35s
1967 SS Chevelle 502 4 speed
2003 Heritage softail w/110 cubic inch screamin eagle kit
'69 Ranger 'F-100 2WD SWB 351W C6 AUTO
1985 CJ 7 jeep w/35s
1967 SS Chevelle 502 4 speed
2003 Heritage softail w/110 cubic inch screamin eagle kit
-
- Blue Oval Fan
- Posts: 561
- Joined: Tue Jul 15, 2014 10:28 pm
- Location: Colorado Springs, CO
Re: shift tube
You might want to post in the Fordification parts wanted section, or go to the Fordification Face book to see if there is anything there. Here is some info that Keith made up for steering column part numbers. It is a great reference: http://www.fordification.com/partnos/st ... column.htm
There are steering column tubes listed there with the part numbers.
Hope this helps!
There are steering column tubes listed there with the part numbers.
Hope this helps!
1972 F250 Sports Custom 390 FE C6 2WD Dana 60 4:10 gears
- michael69
- Blue Oval Guru
- Posts: 1083
- Joined: Sat Dec 01, 2007 8:53 pm
- Location: South Carolina,Walhalla
Re: shift tube
Thanks already have, and on that info Keith posted. The numbers all come back for manual trans with power steering or auto with power steering when I look them up. Wish I could just find a good complete automatic manual steering column but having no luck with that either. Thanks again
Michael69
'69 Ranger 'F-100 2WD SWB 351W C6 AUTO
1985 CJ 7 jeep w/35s
1967 SS Chevelle 502 4 speed
2003 Heritage softail w/110 cubic inch screamin eagle kit
'69 Ranger 'F-100 2WD SWB 351W C6 AUTO
1985 CJ 7 jeep w/35s
1967 SS Chevelle 502 4 speed
2003 Heritage softail w/110 cubic inch screamin eagle kit
- sparky72
- New Member
- Posts: 178
- Joined: Tue May 07, 2019 8:52 pm
- Location: East TN
Re: shift tube
You might try asking over on ford-trucks.com. There’s a fella over there by the name of numberdummy who will almost certainly be able to track down the part number for you.
Taylor
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
1972 F250 Ranger XLT 2wd / 8100 GVW / 390 / T18 / 3.73 D60
- michael69
- Blue Oval Guru
- Posts: 1083
- Joined: Sat Dec 01, 2007 8:53 pm
- Location: South Carolina,Walhalla
Re: shift tube
Thanks I had forgotten about him and that site. Been a few years since I been on that site. Thanks again
Michael69
'69 Ranger 'F-100 2WD SWB 351W C6 AUTO
1985 CJ 7 jeep w/35s
1967 SS Chevelle 502 4 speed
2003 Heritage softail w/110 cubic inch screamin eagle kit
'69 Ranger 'F-100 2WD SWB 351W C6 AUTO
1985 CJ 7 jeep w/35s
1967 SS Chevelle 502 4 speed
2003 Heritage softail w/110 cubic inch screamin eagle kit
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: shift tube
We have that here. http://www.fordification.com/partnos/st ... column.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: shift tube
Sorry guys...the devil made me do it.
Lot of ya'll don't know the bad blood between fte and here.
Required reading.
http://w.fordification.com/censorship.htm
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4