. Which is Best ? Does anyone have any pictures of wheels in the fender ?Thanks
Where to drill hole for locating pins in CV Swap
Moderator: FORDification
-
68shortbedinmo
- New Member
- Posts: 78
- Joined: Sun Jul 26, 2009 3:46 pm
Where to drill hole for locating pins in CV Swap
I am to the point I need to get my CV front end located. Do you drill the holes for the locating pins on the Original Centerline ? I have heard on it in front of it behind it . Which is Best ? Does anyone have any pictures of wheels in the fender ?
Thanks
. Which is Best ? Does anyone have any pictures of wheels in the fender ?Thanks
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Where to drill hole for locating pins in CV Swap
Here's how flyboy71 did it. http://www.fordification.com/forum/view ... 0&start=15
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.