disc brake porportioning valve location
Moderator: FORDification
-
jbrown414
- New Member
- Posts: 86
- Joined: Wed Aug 09, 2006 10:10 am
- Location: Texas, Fort Worth
Re: disc brake porportioning valve location
The bolt holes that mount it to the steering gear look to be closer together than the ones on Keith's bracket. Looking at my manual gear box on my 67, it looks like it would mount to it. So, maybe there was a bracket for manual and one for p/s. Looks like I need to hunt down a p/s bracket.
-
tybob81
- Blue Oval Fanatic
- Posts: 840
- Joined: Thu Mar 23, 2006 2:53 am
- Location: Murphysboro IL
- Contact:
Re: disc brake porportioning valve location
I have a 2 piece bracket off a 76 with power steering I don't need anymore.
1968 swb hydroboost, ididit tilt column, Saginaw p/s pump with F series serpentine, all led lights, Vintage Air and painless wiring. 393w, tko600. CV front suspension w/c5 calipers and gt500 rotors. Stock Flexomatic leaf springs with 01 CV 8.8, 3.90 gears and Auburn locker. Custom wood bed floor. Full frame off resto-mod.
-
jbrown414
- New Member
- Posts: 86
- Joined: Wed Aug 09, 2006 10:10 am
- Location: Texas, Fort Worth
Re: disc brake porportioning valve location
PM sent.tybob81 wrote:I have a 2 piece bracket off a 76 with power steering I don't need anymore.
-
SportsterSport
- New Member
- Posts: 4
- Joined: Mon Jul 23, 2018 10:23 pm
Re: disc brake porportioning valve location
Just an update the hard line has a different nut size and will not fit the proportion valve or master cylinder. I am returning the front lines and was told I have a 1995 f100 brake setup.