Possibly the hardest working bumpside ever??
Moderator: FORDification
- Manny
- Blue Oval Guru
- Posts: 1190
- Joined: Wed Oct 04, 2006 7:15 pm
- Location: Georgia, Lake City
- Contact:
Possibly the hardest working bumpside ever??
It's what y'all think but i myself say she has worked many a rough hour. The seating arrangements kill me. Courtesy goes to Ron Schartiger of Maryland another old True Blue Trucks friend for sending me this truck. He knows it well and says it been around forever. It's parting piece is a circle track car small block chevy. When the fte popped it was all they had.....
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
- 1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Possibly the hardest working bumpside ever??
I don't know why......but i'm getting the tingling sensation that tells me id like to own this........
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
-
- 100% FORDified!
- Posts: 2068
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Possibly the hardest working bumpside ever??
I can see the potential, that's what worries me.
po·ten·tial
pəˈten(t)SHəl/Submit
adjective
1.
having or showing the capacity to become or develop into something in the future
I can see it become one more vehicle that I'll never get done. (but it's still cool )
po·ten·tial
pəˈten(t)SHəl/Submit
adjective
1.
having or showing the capacity to become or develop into something in the future
I can see it become one more vehicle that I'll never get done. (but it's still cool )
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: Possibly the hardest working bumpside ever??
I've parted out better looking trucks
Why and how far did you need to drag it?
Why and how far did you need to drag it?
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- Manny
- Blue Oval Guru
- Posts: 1190
- Joined: Wed Oct 04, 2006 7:15 pm
- Location: Georgia, Lake City
- Contact:
Re: Possibly the hardest working bumpside ever??
Oh no lets be clear manny does not own this fine piece of machinery. Kinda want to operate it for a bit to just feel as if i can operate anything and cheated death. This truck is owned by some loggers and they still use it with the dump truck and trailer that hauls it to clean up debris from the job site. They won't let it go...Ranchero50 wrote:
Why and how far did you need to drag it?
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
-
- Preferred User
- Posts: 487
- Joined: Fri Dec 23, 2005 11:26 pm
- Location: Washington, Spokane
Re: Possibly the hardest working bumpside ever??
That is the biggest doodlebug I've ever seen.
too many Fords, no where near 'nuff time.
or, money.
or, money.
-
- Blue Oval Fanatic
- Posts: 852
- Joined: Wed Nov 09, 2016 5:49 pm
- Location: Galion, Ohio
Re: Possibly the hardest working bumpside ever??
That looks like an accident waiting to happen..........can I try it out?...........
"Life is a garden - dig it"...........
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
1968 F100 2wd - Rangoon Red - 360 w/T18 - power steering and brakes
1997 Honda CBR 900RR
- WarEagle
- New Member
- Posts: 186
- Joined: Mon May 07, 2012 12:46 pm
- Location: Pike Road, Alabama
Re: Possibly the hardest working bumpside ever??
Definitely one of a kind! Wasn't sure about it at first, but if you stand there looking long enough, it kinda grabs you........like dead wood.
1972 F100 300 cid straight 6
2009 F150 4.6L Super Crew
2009 F150 4.6L Super Crew
-
- New Member
- Posts: 140
- Joined: Wed Nov 25, 2009 12:43 pm
- Location: Pennsylvania
- Contact:
Re: Possibly the hardest working bumpside ever??
I think I needs some TLC It looks like the hood emblem might suggest a 1967 ? They prob smashed the cab an had to cut it off to use it??? 4wd big trucks getting rare to find.
-
- Blue Oval Fan
- Posts: 663
- Joined: Tue Jun 21, 2016 2:27 pm
- Location: Northern Michigan
Re: Possibly the hardest working bumpside ever??
Looks like you'd get tetanus just by operating it, but its sweet!
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle