80-83 f100 rear disk brake options
Moderator: FORDification
-
Bronco_77
- New Member
- Posts: 134
- Joined: Sun Mar 27, 2016 7:55 pm
80-83 f100 rear disk brake options
I've read on here some where what u could swap the rear disk off of and install on the 80-83 rear seems like they came off a 90s mustang or 96-03 explorer. If anyone can help me or point me in the right direction it would be greatly appreciated. Thanks
68 f100 390 3 speed on the collom G maw gave to me G paw drove in late 70s till late 80s
77 bronco 302 lifted 5.5 with 33s and rears cut
69 Mustang boss 302 clone bought when was 14 sold when was 28 to build house
77 bronco 302 lifted 5.5 with 33s and rears cut
69 Mustang boss 302 clone bought when was 14 sold when was 28 to build house
-
ultraranger
- Blue Oval Guru
- Posts: 1147
- Joined: Wed Apr 27, 2011 9:15 pm
- Location: Arkansas, Camden
Re: 80-83 f100 rear disk brake options
Steve
1969 SWB F100 Ranger. 240-6, C-4, 9" N-case 31-spline Traction-Lok w/3.50 gears.
1968 Mustang. My high school car. Owned since 1982.
2003 Azure Blue Mustang Mach1.
1969 SWB F100 Ranger. 240-6, C-4, 9" N-case 31-spline Traction-Lok w/3.50 gears.
1968 Mustang. My high school car. Owned since 1982.
2003 Azure Blue Mustang Mach1.
-
Bronco_77
- New Member
- Posts: 134
- Joined: Sun Mar 27, 2016 7:55 pm
Re: 80-83 f100 rear disk brake options
Can anyone tell me which cobra kit from currie enterprise will fit a 80-83 9 in. I called and talked to them and they said only there $700+ woodwill kit would work or any other options for disk. Thanks for any help I'm stuck.
68 f100 390 3 speed on the collom G maw gave to me G paw drove in late 70s till late 80s
77 bronco 302 lifted 5.5 with 33s and rears cut
69 Mustang boss 302 clone bought when was 14 sold when was 28 to build house
77 bronco 302 lifted 5.5 with 33s and rears cut
69 Mustang boss 302 clone bought when was 14 sold when was 28 to build house
-
Bronco_77
- New Member
- Posts: 134
- Joined: Sun Mar 27, 2016 7:55 pm
Re: 80-83 f100 rear disk brake options
The sales guy told me a 80-83 rear end had late model large bearings with early model large bearing off set was the reason nether would work but I've seen on here where guys have used factory ones so I would think one or the other would have to work. Thanks for any help.
68 f100 390 3 speed on the collom G maw gave to me G paw drove in late 70s till late 80s
77 bronco 302 lifted 5.5 with 33s and rears cut
69 Mustang boss 302 clone bought when was 14 sold when was 28 to build house
77 bronco 302 lifted 5.5 with 33s and rears cut
69 Mustang boss 302 clone bought when was 14 sold when was 28 to build house