I've searched a few times, and haven't found a direct reference, so figured I'd ask; Does anyone have a Bronco II fuel tank in their two wheel drive bumpside? Maybe even photos of a short wheel base?
I put an 84 Bronco II fuel tank in my 73 F250 4x4, and I understand the frames are approximately the same width, but wasn't able to confirm for myself. It was a relatively straightforward install.
For some reason, I've not come across anyone putting these in a two wheel drive. Are there any differences that I'm missing? I've seen countless early Mustang and a few Scout tank installs, but I want the filler neck on the drivers side, and I'm planning on getting a newer Bronco II tank with the in-tank fuel injection pump and sending unit.
Thoughts?
Bronco II Fuel Tank in a 2wd?
Moderator: FORDification
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Bronco II Fuel Tank in a 2wd?
The real frame rail width is the same on the bump 2wd and the dent 4wd. Different on the dent 2wd. http://www.fordification.com/tech/fueltank01.htm
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.