Rebuilding Restoring Switches
Moderator: FORDification
-
69Ford
- Blue Oval Fanatic
- Posts: 790
- Joined: Tue Sep 11, 2012 9:59 pm
- Location: Minnesota
Rebuilding Restoring Switches
I've collected several switches over the years and some did not want to work. I bent the tabs back on one and took it apart very easy to restore just be carefull of the springs and ball bearings. So don't throw those switches away. Backup, Cargo, Blink Marker lights, Gas Tank Selector, I have not done a headlight or ignition switch don't know if they can be done. Etc
Last edited by 69Ford on Mon Jan 11, 2016 2:26 am, edited 1 time in total.
1969 Ford F100 Styleside standard cab 360 C6
-
bluef250
- Blue Oval Fanatic
- Posts: 924
- Joined: Fri Oct 29, 2004 8:49 pm
- Location: Arizona
Re: Rebuilding Restoring Switches
I have done the fuel tank switch. I agree that it was not very hard. Mostly what it needed was a cleaning. Other switches have rotted or heat damaged plastic which would need to be replaced. Contacts can be silvered with a high content silver solder.
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: Rebuilding Restoring Switches
Well done! 
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
1972hiboy
- 100% FORDified!
- Posts: 2421
- Joined: Thu Sep 09, 2010 5:44 pm
- Location: California, Santa Cruz
Re: Rebuilding Restoring Switches
Id rather have a half worn, but clean and operable 40 yr old ford made switch then toss it and replace it for a chinese made new one any day......
Rich
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
1973 f350 super c/s 460/c6 22k orig miles
1972 f350 srw crewcab special 390
1972 f250 4x4 sport custom 390fe Red
1972 f250 4x4 custom 360 FE " Ranger Ric"
1972 f250 4x4 custom 84k og miles 390
1971 f250 4x4 sport custom 56k og miles. 360
1970 f250 4x4 428 fe hp60 205 d60
Dont eat yellow snow.....
-
Busboy
- Blue Oval Fanatic
- Posts: 943
- Joined: Sat Jan 24, 2015 9:51 am
- Location: Nampa Idaho
Re: Rebuilding Restoring Switches
Yeah, most of even the NAPA switches are Chinese and all of Dennis Carpenters crap is.
1967 F-100 4x4 custom cab.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.
Another 67 F-100 4x4 custom cab.
2016 F-150 Eco-Boost 2.7 liter. (It will smoke the tires!)
1972 F-350 Sport Custom cab & chassis.
1972 F-250 Explorer Special, Camper Special.
1971 F-100 custom. 302, C-4, p.s. p.b. factory 65 amp alternator with transistorized voltage regulator.