Long beds vs short beds
Moderator: FORDification
-
- New Member
- Posts: 44
- Joined: Wed Nov 11, 2015 8:57 am
Re: Long beds vs short beds
Im a musclecar guy, so for me i look at long beds like, car guys look at 4 door Chevelles. They have 2 doors too many and long beds are 1ft. too long.
-
- New Member
- Posts: 134
- Joined: Tue Jun 09, 2015 2:12 pm
- Location: Napa,CA
Re: Long beds vs short beds
I specifically sought out a short bed. I was hoping for something older but either they were way out of my price range or they were something that was going to be a decades long project. I wanted a driver so I have my 68. Luckily its a 240 with 3 speed which is exactly what I wanted. My wife says the proportions of the cab to the bed are off. She is right at some angles, at others its good.
You do not have the required permissions to view the files attached to this post.
1968 F100 SWB Flareside, 240-6, 3 speed, 3.70 rear, bone stock and rust free.
- Canonman67
- Blue Oval Fan
- Posts: 536
- Joined: Wed Apr 30, 2014 4:49 pm
- Location: California, Galt
-
- New Member
- Posts: 83
- Joined: Sat Feb 18, 2012 3:34 pm
- Location: Ft. Worth, TX
Re: Long beds vs short beds
To me it depends on what you are doing with the truck. If the truck is being lowered; I think the short beds look the best. I have only seen a few long beds that looked "right" in my eyes when they were lowered; and those typically had a very tall tire on the back to take up a lot of space. Stock restoration, they both can look great. Lifted/4x4 then I would 100% build a long bed. A short bed 4x4 looks goofy to me; especially as the tire size grows.
On another note. People go through a lot of effort to convert long beds to short beds. I have always wondered what it would look like to just shorten the front half of the bed and leave the extra two inches in the back of the bed. A intermediate bed per say. Kinda a 63 Galaxie look with the long trunk.
On another note. People go through a lot of effort to convert long beds to short beds. I have always wondered what it would look like to just shorten the front half of the bed and leave the extra two inches in the back of the bed. A intermediate bed per say. Kinda a 63 Galaxie look with the long trunk.
Build thread:
http://www.ford-trucks.com/forums/12052 ... build.html
http://www.ford-trucks.com/forums/12052 ... build.html