Can someone tell me what hood and bumper is on this truck
Moderator: FORDification
-
- New Member
- Posts: 6
- Joined: Sat Aug 22, 2015 8:48 pm
Can someone tell me what hood and bumper is on this truck
Last edited by Ngeorgia on Sun Aug 23, 2015 9:17 am, edited 1 time in total.
-
- New Member
- Posts: 6
- Joined: Sat Aug 22, 2015 8:48 pm
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Can someone tell me what hood and bumper is on this truck
Is it a numbers matching truck?
- MAK
- Blue Oval Fan
- Posts: 528
- Joined: Tue Dec 21, 2004 9:35 am
- Location: Georgia, Blairsville - Florida, Flagler Beach
- Contact:
Re: Can someone tell me what hood and bumper is on this truck
Looks like a standard 67-72 bumper and hood but the hood has had the front seam filled and the badging and side marker removed. Looks like a 69 grill.
-
- New Member
- Posts: 6
- Joined: Sat Aug 22, 2015 8:48 pm
Re: Can someone tell me what hood and bumper is on this truck
Sorry about the dead image link. The blue truck is the one I don't think is a stock bumper
- MAK
- Blue Oval Fan
- Posts: 528
- Joined: Tue Dec 21, 2004 9:35 am
- Location: Georgia, Blairsville - Florida, Flagler Beach
- Contact:
Re: Can someone tell me what hood and bumper is on this truck
Definitely a custom cut and fill job. Mounting bolts welded in and then ground down, etc.Ngeorgia wrote:Sorry about the dead image link. The blue truck is the one I don't think is a stock bumper
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: Can someone tell me what hood and bumper is on this truck
Blue one looks like a dent side, less pronounced center ridge and the sides of the center hump closer at the front. Bumper off of a late 50's, early 60's truck
Red one looks like a stocker that's filled and debadged.
Red one looks like a stocker that's filled and debadged.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
Re: Can someone tell me what hood and bumper is on this truck
Definitely a 73 up hood modified to fit.
wanting to buy a mercury tailgate!
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
-
- 100% FORDified!
- Posts: 2068
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Can someone tell me what hood and bumper is on this truck
It's hard to tell but the bumper might be a rear bumper off a van , thats been trimmed down ?
Last edited by cep62 on Sat Aug 29, 2015 7:12 pm, edited 1 time in total.
- 72 f100
- New Member
- Posts: 59
- Joined: Wed Aug 14, 2013 6:15 am
- Location: Nokesville Virginia
Re: Can someone tell me what hood and bumper is on this truck
I red an article about the blue truck awhile back and from what I remember the hood is a dentside with alot of modifications to fit. The bumper was off of a ford van if I remember correctly
- radioactivelarry
- New Member
- Posts: 184
- Joined: Thu Jan 08, 2015 1:55 am
- Location: Northern California
Re: Can someone tell me what hood and bumper is on this truck
Looks like a Foose custom bumper job. Foose will trim the bumper to make it fit closer to the fender.
Looks good!
Looks good!
Democracy is two Wolves and a Lamb voting on what to have for lunch. Liberty is a well armed Lamb.
Ben Franklin.
My Motto: I wish I had less to do, more time to do it in and got paid more for not getting it done.
Ben Franklin.
My Motto: I wish I had less to do, more time to do it in and got paid more for not getting it done.